10Pcs 4'' inch Jewelry Diamond Saw Blade Arbor 1/2" Cutting Disc lapidary blade

Description

10Pcs 4" inch 100mm Super-Thin Diamond Lapidary Saw Blade Cutting Disc Arbor Hole 12.7mm Rim 0.4mm Saving in Material for Jewelry Gems Agate Code XYP-100-0.3-12.7-10Pcs
Product Specification:
Outside
Diameter : 100mm (close to 4")
Arbor hole : 12.7 mm(close to 1/2")
Thickness:
0.012"(0.3mm) core thickness / 0.016" (0.4mm) on the edge where the diamond is.
Quantity:  10 Pcs
Product Description:
Exclusively designed for processing materials for softer high value rocks like turquoise, gaspeite, opals.
These blades are manufactured by crimping Synthetic diamonds directly into the edge of the saw blade. They are best suited for turquoise, opal, glass, and stones in the 4-6 range on the Mohs hardness scale.
We don't recommend using this blade to cut too hard materials, such as: agate and jadeite with a Morse hardness of 6-7. Because it is difficult to cut or the blade will be damaged quickly.
Advantages: achieving satisfactory cutting results and reducing unnecessary material consumption.
This thin diamond lapidary saw blade offers a very good cost effective option for those that want either very thin kerfs or plan on short term use.
Used for Trimming: They are excellent for trimming small shapes into stones.
This simply means that these blades are meant for small material, not large or slabbing techniques. Also, these blades operate in a single direction so make sure that the arrow on the blade is pointed towards you when mounting.
Use with water as a lubricant.
New, Unused Blade - Not in Original Packaging
These blades were originally packaged in oil so you will see several oil spots on the surface.
We will send out your order within 1-2 days after payment has been received and cleared. Please let us know if you are looking for other accessories or hardware. Should you have any queries, please contact me directly.